Tips for Managing Construction Cleanup and Debris

Construction sites generate a lot of debris and waste, most of which is hazardous to human health. Some of this waste is generated directly as a result of construction activities while others are created indirectly. The non-hazardous waste materials on construction sites can range from bricks, rubble, wood, concrete, insulation and wiring waste, nails and rebar, etc. The hazardous waste often consists of lead, asbestos, plasterboard, etc. While construction site clean-up can be done meticulously, materials such as plasterboard release toxic gases, such as hydrogen sulfide, when they are broken down in landfills.

The non-hazardous construction site debris also poses a problem for construction site clean-up because of the lack of space for their disposal. Landfills are filling up at a very fast rate and many are closing down because of reaching their full capacity. It is important to manage and control wastage in order to make construction site clean-up easier for all concerned. There are many ways in which you can do this, which include recycling and reusing.

Recycling construction site debris can help reduce landfill waste. Some of the waste that can be recycled are aluminium, wood, concrete, corrugated cardboard, asphalt, and specific metals. Cleaning up in a recycling project takes place at the job site by segregating the waste according to specific categories such as concrete, metal, or wood, and sending them to the recycling site. Sometimes, recycling can be done on the site of the construction itself. There are instances where all the wastes with recycling potential is collected from the site and segregated later at the recycling facility.

An important way to clean up construction site debris is by reusing them, especially materials left over from a demolition project, such as door frames, doors, window frames, fixtures, etc. Before clean-up itself, these materials must be identified so as not to be disposed of by mistake.

There are different protocols for cleaning up different types of debris on a construction site. To start with, debris can be categorized into some broad areas, which are solid wastes, hazardous wastes, petroleum products, pesticides and fertilizers, detergents, etc. It is important that all employees are aware of best practices for waste management on site and adhere to these.

Areas and containers used for storage must be inspected for any leaks, spills, or other malfunctions. Workers must be properly trained in handling and disposal and must be aware of how to protect themselves when doing so.

When cleaning up different types of waste, it is important to know what to do and what not to do. For example, when cleaning up solid wastes, it must not be dumped where it can drain away to a water body or where there will be runoff from areas at a higher altitude. Hazardous materials are best disposed of with the label on them intact, and following manufacturer’s instructions. The same applies for petroleum and pesticides and fertilizers. Detergents should not be dumped into the system for storm drainage but to a sanitary sewer. Keeping these points in mind can help to successfully manage construction site cleanup optimally.

Interior Post Construction Cleanup Tips

There is nothing worse than bringing contractors in to do a construction project only to find that once they have finished the job, they have left their mess behind. Construction site cleanup is part of the construction industry and it can be a messy job, but someone has to do it. You can make your life easier by cleaning as you go for starters, and that should help reduce the burden of the final cleanup to a degree. While it’s impossible to cover every aspect of a proper construction cleaning project, a good place to start would be to remove trash and debris on a daily basis, particularly wood and paint particles which can pose as dangerous fire hazards.

There are plenty of construction companies that might make use of a separate contractor to do the cleanup for them since it can save a lot of time and money by bringing in specialists (dependent on the size of the job). It is always wise to do a walk-through prior to the start of cleanup for the supervisor to find out exactly what the construction manager’s expectations are with regard to cleanup. This will also help to prevent a poor final product (when the project is completed).

So, what does construction site cleanup really entail? In general, any scuffs, hand and finger smudges, dust and dirt need to be wiped down off the walls and the same goes for trim, baseboards, windows, door frames and handrails. The ceilings will also need a good dust and the removal of any cobwebs that have sprung up. Doors need to be cleaned down- which may include the front, back, sides and the top, and don’t forget about the hinges. Any masonry will need to be vacuumed and cleaned as instructed. All of the carpeting throughout the project will need to be vacuumed as well. Wood, tile or marble should be buffed, waxed and sealed. You will need to clean the tracks, frames and glass on windows. Be sure to clean any of the light fixtures and ceiling fans dust tends to accumulate. Wall & ceiling vents, and floor vents will also be need to vacuumed, and in the case of floor vents they will need to be removed so that you can vacuum as deep as the attachments will allow. Electrical outlets and switches need cleaned since may they gather dust and hand smudges. That is just the basic cleaning inside, it doesn’t encompass the specific cleaning required in a bathroom, kitchen or the entry way. Not to mention any mirrors and cabinets throughout the house, as well as removing any of the manufacturer’s stickers that are not required.

On the topic of manufacturers, you should not forget the importance of which cleaning chemicals should and shouldn’t be used. Only cleaning products recommended by the manufacturer should be used, as the wrong chemical can cause irreparable damage and will set your project back as you have to replace any damaged items, especially things of delicate stonework like marble, granite and quartz. It is very likely that you will be unable to do all of the cleanup yourself, depending on the type of project its likely you will need to call in the professionals to finish off your flooring as it will require sealing and waxing. Now that the inside is taken care of you can begin focusing on cleaning up the outside.